 |
|
|
|
|
|
|
|
|
|
| |
Clip in system of Metacil gives customer
a lot of freedom too design in
accordance with surrounding of various
sizes, patterns and colors.
This
system is one of the most preferred
products of designers due to its
seamless smooth appearances. The lattice
shaped structure is high on strength and
is easy to repair. The installed ceiling
has a prominent effect on the interiors
and offers easy cleaning, non-static
properties and inert material. The
ceiling can optionally be installed with
a rigid grid suspension system, which is
particularly advantageous for external
applications. Lighting, air-conditioning
and other fixtures can be easily
installed on these systems.
The
Clip-in system consists of square tiles
or rectangular panels, which can be
clipped on to carriers which are
profiled to receive the tiles. Two sides
of each tile are raised and pipped and
stopped to ensure positive engagement
into the spring tee and yet allow for
the demounting of individual tiles or
panels.
The Tiles are made
of Steel or Aluminium on sophisticated
equipment, which includes several
leveling stages. The tiles can be coil
coated or powder coated in multiple
colors. These tiles can also be made in
attractive surface profiles besides the
normal flat profile. |
| |
|
|
|
|
|
| |
The perforated panels of
Metacil
tile can be used to alter the
acoustic performance
characteristics and where
soundproofing and insulation are
important. The perforations are
normally of dia 2.5 mm and 5.5
mm c/c but different sizes are
also possible so suit specific
design or functional needs. The
tiles / planks can be backed
with 25 mm thick resin bonded
mineral wool (48 kg/m2)
to provide good sound absorption
Tiles and Planks are also
available with a factory applied
acoustic tissue to the backside
for good sound absorption and a
fire resistant tissue. The
Acoustic properties of these
options are given below. |
|
 |
|
|
|
|
|
|
| |
|
The
Clip-In suspension system can be
flexible or rigid. The main components
of the rigid suspension system are
Clip-in Profile , Suspension angle ,
Hold-on clamp , Ceiling Bracket ,
Pressure clip
The
flexible system uses a hanger and a
butterfly clip instead of suspension
angle and pressure clip. |
|
|
|
|
|
|
|
| |
Metacil
Clip-in False Ceiling System with steel
tile (600 mm x 600 mm) is manufactured
out of 0.50 mm thick regular modified
polyester coated galvanized steel (Z-120
gms total zinc coating mass of both
sides, 240 mpa yield stress). They can
have square or beveled edges. It is
available in matt finish on the exposed
side and a primer coating on the back.
Optionally, it can be coil coated on the
both sides in different standard colour
shades. Then the tile has 20-micron
polyester coated finish and back coat of
5-micron alkyd primer. Two sides of each
tile are raised and piped and stopped to
ensure positive engagement into the
spring Clip-in profile, yet allow for
demounting of individual tiles. The
rigid suspension system consists of rows
of 0.5 mm galvanized steel Clip-in
profiles of size 38 mm X 20 mm,
installed at 600 mm c/c spacing to
support the tiles. Suspension Angles are
suspended from the roof structure by GI
Ceiling Brackets. They are joined to the
Clip-in Profiles by Hold-on Clamps. The
tiles / planks are held in place by
pressure clips. In the flexible system
the Hanger and Butterfly Clip replace
the suspension angle. Wall angle are of
size 25 mm X 25 mm and 0.4 mm thick.
They are made of coil coated steel or
aluminium matching the colour of tiles.
Perforation is of 2.5 mm dia. at 5.5 mm
c/c. |
|
|
|
 |
|
|
| |
|
Metacil
Clip in
Ceiling System with steel tile
(600 mm x 600 mm) is
manufactured out of 0.50 mm
thick regular modified polyester
coated galvanized steel (Z-120
gms total zinc coating mass of
both sides, 240 mpa yield
stress).
These tiles can have square or
beveled edges. These tiles are
available in matt finish on the
exposed side and a primer
coating on the back. Optionally,
it can be coil coated on the
both sides in different standard
colour shades. Then the tile has
20-micron polyester coated
finish and back coat of 5-micron
alkyd primer. Two sides of each
tile are raised and piped and
stopped to ensure positive
engagement into the spring
Clip-in profile, yet allow for
demounting of individual tiles.
The rigid suspension system
consists of rows of 0.5 mm
galvanized steel Clip-in
profiles of size 38 mm X 20 mm,
installed at 600 mm c/c spacing
to support the tiles. Suspension
Angles are suspended from the
roof structure by GI Ceiling
Brackets. They are joined to the
Clip-in Profiles by Hold-on
Clamps. The tiles / planks are
held in place by pressure clips.
In the flexible system the
Hanger and Butterfly Clip
replace the suspension angle.
Wall angle are of size 25 mm X
25 mm and 0.4 mm thick. They are
made of coil coated steel or
aluminium matching the colour of
tiles. |
|
|
|
|
| |
 |
|
Clip-in False
Ceiling System with Aluminium
tile (600 mm x 600 mm) is
manufactured out of 0.70 mm
thick Aluminium alloy AA.
These tiles can have square or
beveled edges. These tiles are
available in matt finish on the
exposed side and a primer
coating on the back. Optionally,
they can be coil coated on the
both sides in different standard
colour shades. Then the tile has
20-micron polyester coated
finish and back coat of 5-micron
alkyd primer. Two sides of each
tile are raised and piped and
stopped to ensure positive
engagement into the spring
Clip-in profile, yet allow for
demounting of individual tiles.
The rigid suspension system
consists of rows of 0.5 mm
galvanized steel Clip-in
profiles of size 40 mm X 20 mm,
installed at 600 mm c/c spacing
to support the tiles. Suspension
Angles are suspended from the
roof structure by GI Ceiling
Brackets. They are joined to the
Clip-in Profiles by Hold-on
Clamps. The tiles / planks are
held in place by pressure clips.
In the flexible system the
Hanger and Butterfly Clip
replace the suspension angle.
Wall angle are of size 25 mm X
25 mm and 0.4 mm thick. Wall
Angles are made of coil coated
steel or aluminium matching the
colour of tiles. Perforation is
of 2.5 mm dia. at 5.5 mm c/c.
|
|
|
|
|
| |
 |
|
Metacil
Clip-in False Ceiling System
with Aluminium tile (600 mm x
600 mm) is manufactured out of
0.70 mm thick Aluminium
alloy AA. It can have square or
beveled edges. Tiles have matt
finish on the exposed side and a
primer coating on the back.
Optionally, they can be coil
coated on the both sides in
different standard colour
shades. The tile has 20-micron
polyester coated finish and back
coat of 5-micron alkyd primer.
Two sides of each tile are
raised and piped and stopped to
ensure positive engagement into
the spring Clip-in profile, yet
allow for demounting of
individual tiles. The rigid
suspension system consists of
rows of 0.5 mm galvanized steel
Clip-in profiles of size 38 mm X
20 mm, installed at 600 mm c/c
spacing to support the tiles.
Suspension Angles are suspended
from the roof structure by GI
Ceiling Brackets. They are
joined to the Clip-in Profiles
by Hold-on Clamps. The tiles /
planks are held in place by
pressure clips. In the flexible
system the Hanger and Butterfly
Clip replace the suspension
angle. Wall angle are of size 25
mm X 25 mm and 0.4 mm thick.
Wall Angles are made of coil
coated steel or aluminium
matching the colour of tiles. |
|
|
 |
|
|
|
|
